Menu
Your Cart

USBASP USBISP 51AVR Programmer

USBASP USBISP 51AVR Programmer
  • Stock: In Stock
  • Brand: xcluma
  • Model: BE-002807
  • Weight: 24.00g
  • SKU: BE-002807
  • MPN: BE-002807
Rs280.00
(GST +18%Extra)

·        Supports all AVR devices with ISP or PDI interface, and certain 51 Devices

·        Programs both Flash and EEPROM

·        Supports Fuses and Lock Bit Programming

·        Based on AT AVRISP mkII firmware

·        Upgradable to Support Future Devices

·        Adjustable ISP programming speed up to 8M frequency

·        USB 2.0 compliant (full speed, 12Mbps)

·        3 optional cables to target board

·        Powered from USB bus, does not require external power supply

·        AT AVRISP mkII compliant

·        Compatible with AT AVR ISP, easy to use, stable and reliable

·        Based on AT AVRISP mkII firmware

·        Identified as AVRISP mkII in AV RStudio, high speed programming

·        Upgradable firmware

·        Firmware is upgradable to Support Future Devices

·        Automatic Upgrade

·        Supported software

·        AVR Studio 4/5/6 or WINAVR(GCC) is used as front-end software

·        Supports the program files generated by IAR, ICCAVR, CVAVR

·        Device Support

·        USB AVRISP XPII supports all AVR devices with ISP and PDI Interface. Support for new devices will be added with new versions of AVR Studio.

·        Supports AT86RF401/AT89S51/AT89S52

·        Description

·        This AVR Programmer is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed.
Features
• Support USB1.1 or USB2.0 communication
• Support WIN98 WINME, WIN2000, WINXP, VISTA, WIN7, WIN8, WIN10 operating system
• Using the USB port power supply board with a 500mA resettable fuse to protect the computer motherboard was burned by accident
• Chip programming can use the power of the target system itself, can also use the programmer from the USB port
• Take the power supply of the target board, but should ensure that the target standard current less than 500mA, so as not to normal programming
• Programming to complete the program is running does not affect the target board
• Support AT89S51, 52 and AVR series chips burn
• Flash, EEPROM, fuse bits read and write operations
• Operate at 2.7V-5.5V voltage
• Faster than the parallel port programming faster and more stable, more convenient notebook computer users
• With automatic multi-level super-stable speed control firmware download process without human intervention based
• Support the programming of all AVR chips, support for the AT89S51, AT89S52 is
• Download the programmer to support a custom parallel port
• Support for custom serial download programming
• Support USBASP programmer
• Support for custom programmed chips
• Support for custom programming fuse information message
• Support for high-voltage programmer
• Support for offline download for offline download
• Support the command line, can be embedded directly in other IDE
• Green software, no installation, les

 

Write a review

Please login or register to review